WARNING: THIS AIRCRAFT SUPPORTS X-PLANE 11 ONLY! 1.3.6: Fixes: * significant improvement of flightplan calculation performance * removed update enforcement 1.3.5 Improvements: * DIR TO/ABEAM function * rudder trimm bindings for hardware Fixes: * restored BROWSER tab for cockpit EFB * fixed GND CTRL ON light behavior * fixed ILS not capturing on some airports 1.3.0 Fixes: * cockpit EFB for MacOS Monterey * DIR-TO intercept mode * output.cfg for multiple monitors under Vulcan * cannot build path for DIR-TO to nearest flightplan point * arc from HOLD exit to next leg not build when HOLD at PPOS 1.2.9 Improvements: * huge optimization for better overral FPS * better EFB performance * HOLDs full functionality * implemented PROG REPORT page * added house liveries * EFIS Baro mode sync * RAD NAV page save/load * added possibility to enter a DIST in OTHER ALTN to get preliminary fuel predictions * flight controls tuning * ALTERNATE PAGES completed * INIT B page (and FUEL PRED): ALT/TIME value computes for selected ALT airport * INIT B page (and FUEL PRED): New s-pad messages were added * Stored waypoints limitation has increased to 40 Fixes: * fixed flight plan sequencing with holding patterns on arrival or go-around route * DIR-TO page contains identical points if holding pattern ahead * T-P position is not continuously updated on temporary flight plan * plane sometimes freezes when using EFB in external browser * INIT A - ground temperature isn't selectable. There wasn't a possibility to enter ground temperature manually. Automatic ground calculation according to airport height. * PROG page Required accuracy had no posibilitty to be entered manually * PERF - CHECK T/OFF DATA * INIT B page (and FUEL PRED): the MIN DEST FOB cannot be erased or changed * INIT B page (and FUEL PRED): the ALTN-Fuel stays empty and isn't being calculated by the MCDU. Also cannot be entered or erased manually * INIT B page (and FUEL PRED): EXTRA-fuel value isn't correct computed * Airways page is scrollable. Insert and erase buttons don't appear at last line * SEC doesnt not take pitch control when ELAC is not engaged * returned X-RAAS win.xpl 1.1.17 Fixes: * restored A320 functioning for MacOS Monterey by disabling cockpit EFB * for other OSes added possibility to switchoff cockpit EFB if necessary 1.1.16 Improvements: * manual PA selection tab in EFB Fixes: * magnetic variation not taken in account in FixInfo * wrong estimate time on FixInfo page * crash because of TCAS with many planes * TCAS traffic not filtered by selector * TCAS shows traffic if STBY mode selected * blank screen EFB on MacOS * landing lights datarefs blinking * crash after PPOS->ARRIVAL click after touchdown and go-around 1.1.13 Improvements: * FIX INFO page completed * TCAS new implementation (single threat) * MAC binaries signed and notarized * EFIS Baro selector synchronization option Fixes: * spoilers half position in Cold&Dark state * SVCE INT OVRD button always ON * Several Clock issues (year, setting values) 1.1.9 Improvements: * some performance optimization * panel hotkeys now are optional in EFB Fixes: * fixed axis curves input * SpeedBrake binded key fix * arming SpeedBrake in VR * fixed crash after clicking HOLD button on point just before PPOS * get rid of artifacts when using RainEffect on OpenGL 1.1.5 Fixed: * XPlane crash when CEF installed on MAC OS 1.1.3 Fixed: * impoved winshield reflections on Vulcan * removed lua log flood 1.1.2 Improvements: * TCA Airbus Quadrant support Fixed: * crash on 1st gen Intel Core, Xeons and old AMD * APU bleed altitude limitations * windshield reflections * spoilers lever dataref 1.1.0 Improvements: * Vulcan graphic driver support Fixed: * saving and restoring popoput panels layout * saving reflection effect setting * spring loaded INT/RAD switch * joystick axes curvers and beta/reverse support 1.0.7 Fixes: * Inoperable EFB in some cases * Different multi-monitor panels and render issues * Rudder trim stuck after -20deg * Render in OGL mode on X-Plane 11.50 * AMU CAB light flash * ISIS position saving * Hiding panels by click on 2D and 3D cockpit panels * Increased takeoff and taxi lights intensity * APU start in flight after dual engine failure * Saving standard and popout panels configuration * Panels resizeing * Possible windows positioning out of visible area * Multi-monitor support for different cockpit interaction modes * Keyboard input into EFB in 2D window mode * Auto CabinReady set in the begining of running before takeoff * Multi-monitor configurations support * Windows resize in pop-out mode * Applying X-Plane UI scaling for new windows 1.0.1 Fixes: * Fixed pop up windows and mouse input in scaled interface 1.0.0 Improvements: - Failures scenarios editor added - CARGO HEAT and CARGO SMOKE panels functionality - CVR panel interaction - all variables in publish.txt available for writing by default - Pop-out 2D windows - Added particle effects Fixes: - Fixed datarefs export via publish.txt file - Fixed broken failures conditions - Do not advice to shutdown second engine when first engine is on fire - Fixed failures reset button - Fixed xEnviro related radar crash - fixed overhead buttons textures - reduced rudder pedals motion - various ND and PFD fixes - thrust levers mouse drag fix - publish.txt fixed on mac - fixed MouseHandler crash on macOS - fixed degrade to direct low after switching IR1 off - added ClockSet command - fixed crash after starting new flight when A320U already loaded - reduced ROSE VOR deviation scale on ND - some visual fixes in ASU - fixed Oxy mask test button click zone - fixed bug with throttle jumped to 30% after reverser button - removed awfull noise after aircraft reload - fixed thrust lever position in cold state - fixed crash on AMD Ryzen processors - RF legs strung in RNAV approaches 0.10.8 Fixes: - Improved CPU usage on MAC - Fixed clicks in VR mode - Fixed communication with activation server - Removed all spaces from the commands list and renewed the commands.txt file Improvements: - Weather radar added - CIDS: added Flight Attendant Panel (FAP) to EFB - CIDS: cabin and galley illumination control from FAP - CIDS: cabin ready function - CIDS: temperature control from FAP - CIDS: cabin and mech calls, interphone, PA announcements and audio management - CIDS: EVAC function - Emergency lighting 0.9.8 - Fixed error with green screens - Fixed bug with pitch trimm command 0.9.7 Fixes: - Radio tune knob fix - Fixed bug with blue spots on indicators and controls on MacOs - Fixed logic when outer tank is empty (caused bug in temperature value) - Fixes faults messages - Fixed default position of some switches according to real life position in that situation - MCDU: Fixed logic on INIT A with engine running (left right arrow now redirects to FUEL PRED PAGE) - MCDU: INIT A page is now available in flight; some changes in logic based on airborne/ground logic - MCDU: fixes in secondary flight plan init - MCDU: fixed logic of entering CRZ FLT LVL - MCDU: fixed appearing/disappearing of some messages and scratchpad clearing - MCDU: fixes in DIR-TO page (ABEAM / w/o ABEAM logic) - SD: Fixed Positioning of Status and added missing elements of clean STS Page - PFD: some cosmetic fixes - Changed MAX altitude to FL398 for flight plan - Fixed logo/wings lights - Various texture fixes Improvements: - Emergency crew oxygen system (controls, indications, stowage boxes and mask test) - Emergency passengers oxygen system (indicators and controls) - Added an alternative input sistem (FlightFactor standard) - Added VR compatability with two modes - Added a dataref for each action in cockpit that can be both monitored and written - added datarefs and command lists - added datarefs publishing system for 3rd party - Added commands to ALL functions in the cockpit that can be used on hardware - Added Predictive GPS Page with basic input logic - Cockpit door locking system - Fade-in for sound when airplane initializing - Versions compatible states (no need to recreate states after airplane upgrade) - Updated service vihicles - Added lightening for overhead, FCU and EFIS knobs 0.8.196 no changelog was provided before this version