2.5.18-beta
- refactored the electrical system to make it easier and more stable to share the basic things with the 787
  So, please test the elec system for any new, strange or unexpected issues.

2.5.17
- fixed incorrectly drawn lines on ND when Zink graphics driver is enabled (this is a temporary solution until Zink driver update on X-Plane side)
- fixed sound coordinates especially for 300
- fixed "AP" and "VSI" indicator display blocks on PFD
- fixed sharp jumps Engine Vibration on EICAS
- fixed shows of "CARGO FWD A/C", "ENG SHUTDOWN" message
- fixed crossfeed aft button lit
- fixed Rising RWY not visible on PFD
- fixed voice recognition not working on macOS after reloading plane or loading saved state
- fixed CDU BRT rotary logic in 2D popup window
- fixed ATIS requests not sending with SayIntentions server depending on Network selection
- fixed possible CTD while receiving CPDLC message on unexpected format
- fixed possible CTD in case of many ACARS messages handled during long flights
- fixed a bunch of possible soft crashes and incorrect logic related to pages navigation on EFB Terminal Charts application
- fixed possible CTD in case of unloading plane shortly after loading due to plane objects still loading
- fixed rarely possible soft crashes during long flight due to 'stack overflow'
- fixed an aileron droop issue in non normal mode and flaperon droop
- fixed the tail strike detection on 200 and F models
- delete load and save X-Plane sit file (fixed issue with CDT after load in "FULL SETUP" situation)
- added option to automatically synchronize Baro and Mins when interacting with Efis Control Panels
- fixed the pos ref apt is not shared between both fmc/cdu
- fixed unexpected removing the next constraint on the mcp alt knob action when in vnav_alt
- fixed no ability to remove the clb spd transition
- made the clb spd transition value dynamic depending by the actual weight
- fixed the vnav clb target spd as flap placard minus 5, not minus 10
- fixed priority of spd constraints in the vnav clb target spd calculation
- added missed v2 related part to toga target spd calculation

2.5.13
- added separate TPMS and non-TPMS wheel nut covers
- fixed SLG algorithm
- fixed APU effects position (300ER)
- fixed minor exterior UV issues
- increased brightness of the wing cam lights

2.5.12
- added a ladder to ECC hatch
- added an option to keep the simmer's seat stationary
- added cam lights for 300ER
- added MEL item for Data Communication Management System
- adjusted shape of flaperons
- change the flaps speed
- fixed non-disappearing cursor in cockpit
- fixed audio for oxygen test on left observer seat oxygen panel
- fixed tiller locked when gear is up
- fixed possible incorrect status of Data Communication systems in case of individual sources failures
- fixed switching range on TCAS panel adjusted/limited from 0 to 7
- fixed (possibly) a mac issue with blade rotation

2.5.10-hotfix
- reverted completely "added a ladder to ECC hatch"
    due to it introduces a lot of issues with ground services

2.5.9-hotfix
- hot fix for ground equipment

2.5.8
- added a ladder to ECC hatch
- fixed fuel to remain bug
- fixed delay in the operation of hydraulic pumps C1/C2
- fixed fmc could not now work via hf acars link
- fixed unexpected fmc perf data uplink invalid
- fixed no receiving fmc uplinks when airline or flt number SimBrief fields are not filled
- fixed no receiving fmc uplinks if OFP was obtained before any fmc is active
- fixed display of open doors on DOOR page on MFD
- fixed door names in DIRECTORY section on CDU
- fixed buttons event "selected all" (CheckAll or ResetAll) on Walk-Around EFB
- fixed LAM behaviour

2.5.7
- added fmc datalink from SimBrief (do not forget to obtain the SimBrief OFP in the EFB first)
- fixed FUEL EST and MAX values possibly displaying in red on Briefing/Weights page in EFB
- fixed fuel Jettison animation
- fixed connected to PRI/SEC Ext Power prior to switching Battery ON
- fixed Crew limited to  28 instead of 22, for 300ER
- improved wing condensation effect
- improved the shape of stabilizer and elevator
- fixed tail number of Loadsheet
- fixed and improved some animations of nose gear
- added tail skid contact effect (300ER)

2.5.5
- added files ".set"(JAR GHD) for 777-F and 777-300ER
- fixed flap load relief speed (300ER)

2.5.5
- fixed display of "three range arcs" on display ND
- fixed display of EPR scale(dials) on EICAS
- fixed exterior shadow in cockpit view
- fixed symbolsEffects cdu dataref could not be updated
- fixed incorrect MEW on the 300
- fixed ability to call/connect to Main Cargo Loader on 300ER
- fixed page Cargo Hold Configuration on EFB
- fixed on 300ER missing option to switch No Electronics Signs option
- fixed alternate switching on of C1/C2 ADP during flaps movement
- fixed the SLG algorithm
- fixed mouse control (broken for some users)

2.5.4
- adjusted 200ER RR idle
- fixed 777-300ER not loading with GE90-115B engines selected in 200ER-300ER-EE package
- fixed plane not loading correctly if macOS-specific metadata files are present in the model folders
- fixed bug in "Restore Consumables" function related to hatches
- fixed issue in CAPT PREFLIGHT procedure for 300ER
- fixed cargo depiction on EFB CARGO LOADING SYSTEM page for 777-F
- fixed the music option
- fixed stacked camera loading in 300ER

2.5.3
- updated paid livery packages for 300ER, redownload them from the store
- added QATAR F1 from the box livery for 300ER
- added music option
- fixed the pushback (300ER)
- fixed incorrect positions of OS pop-out displays windows after aircraft loading 
- fixed SLG
- fixed crew rest door clickzone
- fixed parkbrake situation issue when in non realistic parkbrake mode
- fixed issue in FO procedure for 300ER

2.5.2-alpha
- fixed flap placard speeds on the fwd panel for 300ER
- fixed default state of doors when "Cold&Dark Ready or Connected"
- fixed beacon light position for 300ER
- fixed position loadsheet
- fixed CG displaying in EFB for 300ER
- fixed the behaviour of landing gear controll fault 
- fixed tail skid (300 only)
- fixed movement using EFB Shortcuts
- fixed sun visors 3d
- fixed UV of SATCOM radome for 300ER

2.5.1-alpha
- updated the remote CDU, a new generation added
- updated paid livery packages for 300ER, redownload them from the store

2.5.0-alpha
- added 777-300ER, purchase required
- added no analog clock option
- added modern cdu panel option
- added modern compass option
- improved CPDLC/ACARS stability/operations
- improved multi-monitor configurations support
- fine tuned backlights/instruments/displays brt things according to the references from real plane
- fixed cases where closed OS popup displays appear empty after next plane loading 
- fixed ACARS systems not working after first successful request on macOS/Linux
- fixed alternate switching on of C1/C2 demand pumps during movement Flaps
- fixed issue in OPT when hg and hPa determined incorrectly
- fixed WX RDR panel tooltips text
- fixed various 2D window popups (related to procedures, crew operations and tooltips) having wrong position in specific multi-monitor configurations
- fixed Available and Operational numbers swapped on EFB MEL page 
- fixed possible fmc soft crash when the vnav cdu crz page is active and spd limit mode is active
- fixed fpa is displayed on the ground on des vnav page
- fixed can't access cockpit via gate

2.4.2
- added a redesigned remote CDU
- improved SATCOM/ACARS systems logic
- fixed various issues with plane after receiving fuel sample test results
- fixed unwanted LIT in plane objects

2.4.1-hotfix
- allowed longer names for custom saved states in EFB Situations page
- added highlight for currently selected "ON RELOAD" state in EFB Situations page
- fixed some brt knobs not centered by default
- fixed "secure checklist" incorrect call
- fixed several items in shutdown procedure
- fixed the heading to course logic 
- fixed GA thr limit after takeoff for flaps 20
- fixed rte copy prompts
- increased afds vs threshold for auto ias/mach switching
- fixed issue when vnav_path could stay active which big vtk
- fixed hold time input
- fixed the oxygen П action in procedures

2.4.0
- added interactive procedures feature
- added option for aural alerts pilots when approaching or deviating from a preset altitude
- added single wheelbrakes level support
- added text selection behavior to all entry fields in EFB/EFIS GUI after click on them
- reworked the service page logic and colors to allow multiple requests simultaneously 
- reworked the master brt system:
    - added missed stuff to be controlled by master brt: CDU, EFB, stby, MCP, and more
    - tuned brt balance to be good
    - the logic is realistic by default now
    - the realistic master brt option now only makes it a bit more realistic,
        so with the option you will have to set knobs to middle 
        to be able to activate master brt control on it.
- completely reworked the brake energy-heat exchange
- changed GUI on EFB Situations page (more saved states will fit into selection box)
- fixed some cases of "UP" buttons on EFB pages leading to wrong places
- fixed outbrake disarm on manual braking issue
- fixed close hatches not working with deicing tracks waiting
- fixed several issues with deicing starting when doors are open etc.
- fixed animation and position secondary stair
- fixed dialog Load Master freight is unloaded
- fixed possible missing NOTAMs on Briefing pages in EFB
- fixed some typos in "Did you know?" section during plane loading
- fixed master voice upon loading/unloading completion 
- fixed some bugs will calling deicing and added more info to the manual
- fixed a bug with master making incorrect calls when loading/unloading is done
- fixed interactive procedures window positioning when X-Plane user interface scaling setting is applied
- fixed interactive procedures window flickering on show/hide actions

2.3.15
- added option to display ghost throttle levers on Eicas
- added simulated upper bezel buttons on EFB screen when it is in separate OS Window or in VR
- added minor decals for Freighter
- changed visual appearance of some graphics elements in EFB pages/apps
- fixed upper X-Plane aircraft menu loading items text from saved states
- fixed saaru providing backup hdg/trk on the ground
- fixed possible weights discrepancy between airplane and fmc when loading to default running state
- fixed fmc does not set clb thrust limit when no active vnav afds mode
- fixed incorrect spd target for flch afds mode when activated from toga active mode
- fixed possible issues when inserting a leg into a rte when the other rte contains the same leg
- fixed a/t going to idle at 25 RA when toga has been activated
- fixed displaying "EGT Start Limit Line" on EICAS
- fixed issue with C1 and C2 AIR DEMAND adn C1/C2 ELECTRIC PRIMARY switches in checklist
- fixed logic of fuel system with a low amount of fuel in central tanks
- fixed possible vnav tgt speed overspeed/underspeed issue (in some cases it is still possible and this is ok as per IRL)
- fixed vnav spd line on the des vnav page (e.g. reverse order cas/mach->mach/cas)
- fixed possible issue when the des profile segment could be calculated for wrong weight

2.3.14-alpha
- for testing procedures

2.3.13-alpha
- for testing procedures

2.3.12
- update manual
- fixed operation STORM Light Switch
- fixed maintenance of tires taking into account their wear
- fixed default ZFW in welcome widget displayed incorrectly 
- fixed checklist items with self modification (e.g. flaps ___) 
- fixed deicing not beeing available more than once
- fixed several minor bugs with deicing 
- fixed no message in processes list while waiting for deicing 
- fixed deicing truck No2 disappearing 
- fixed some knobs lit
- fixed wx radar knobs positions
- fixed incorrect rotation for some knobs

2.3.11-alpha
- for testing procedures

2.3.10
- СG graphic has been corrected
- added show Stick Shaker Indicator in AOA Indications on PFD
- added option "Realistic Light Control"
- fixed fuel value after loading situation with welcomeWidget
- fixed ckpt printer animation
- fixed text overlapping in EFB airplane loading service page
- fixed the parkbrake
- fixed alternate flaps
- fixed show dialog Purser 'No Smoking' when mode is selected 'No Electronics'
- fixed gears and tires maintenance
- fixed right oxymeter bug
- fixes and improvements in 3d cockpit
- adjusted state "MINS" when loading on ground and with engines running

2.3.9-hotfix
- typos and mistakes in the manual corrected
- fixed overhead buttons 

2.3.8
- added disabling of CON IGN by engine type or by option for GE
- fixed situations when TERR/WXR outputs are not visible when Master Brightness switch is ON
- fixed reset of ground services during Simplified loading
- fixed queue "hanging" during instant and automatic maintenance
- fixed hydraulic fluid consumption
- fixed some alerts Air System for Freighter
- fixed EEC hard alternate mode indications when engines are off
- fixed full unlocking of ground equipment menu after landing
- fixed oxygen yellow cross almost not appearing
- fixed simplified loading disconnecting ground power
- fixed maintenance/refilling hydraulic system with pumps running
- fixed "crash/bug" with multiple taps button "Reset Engines"
- fixed standard packing brake dataref showing 0 even when parking break is on under certain conditions. 

2.3.7-hotfix
- fixed snow on aircraft bug from 2.3.6

2.3.6
- adjusted TERR radar elevation-based output far from airport areas
- adjusted TERR radar conditions for Peaks mode
- added new special freight (-F only)
- added message on EFB maintenance page is no ground crew present
- fixed logic dialogues for "unload"
- fixed wing lights glass position on the Freighter
- fixed request ground personal on page communication ground crew
- fixed "Request Close Hatches" command does not close hatches
- fixed logic working hydraulic system by L/R ELEC pumps in AUTO position, and AIR C1/C2 pumps in ON position
- fixed the parkbrake broken in 2.3.5


2.3.5
- fixed flight controls issues in case of loading compatible states
- fixed some typos in EFB interface
- fixed possible 1px visual gaps between popup windows header UI and popup contents
- fixed and added new positions for shortcuts page (-F)
- fixed door lights stay on when loading with engine running
- fixed crash on trying to close cargo door from EFB

2.3.4
- added MARK button to mark equal weights states as LOADED/UNLOADED
- fixed APU feed fuel logic
- fixed work DC pump and isolation valve
- fixed ALTN VENT Fault light
- fixed flap limits text
- fixed autobrake RTO disarming itself when pulling speedbrake lever out
- fixed autobrake going into RTO when you push the speedbrake lever in
- fixed some order issues in cameras (-F)
- fixed the flaps symmetrical stuck failure
- fixed the brake cooling speed a bit
- fixed stabiliser streamliner logic
- fixed control effectiveness issues at low speeds
- fixed emergency lights doors and related slide lights external
- fixed save engine consumables to next flight

2.3.3
- added GE90-115BL, extension purchase required
- added taxi/cargo cam (-F)
- added 3d model of taxi camera for Freighter
- fixed state doors auto/man for Freighter
- fixed DRIVE Disconnect Switches and reset IDG
- fixed menu of ground equipment
- fixed brake with hardware button cannot use realistic park brake option
- fixed brakes not disengaging when toggling hold brakes command with super low brake intensity setting
- fixed catering service for Freighter
- fixed green cover on left nav light
- fixed cabin light on internal view
- fixed unwanted clickzones in the cockpit and cabin (-F)
- fixed AO on APU panel (-F)
- fixed certain range fuel external change issue (-F)
- fixed lighting galley and main cargo
- fixed beacon light inside Freighter main deck
- some fixes for vmo as keas (-F)

2.3.2
- fixed 777-200 in XPlane11
- fixed CTD after receiving response messages through ACARS
- fixed air conditioning control panel
- fixed options for Freighter version
- fixed snow on the Freighter fuselage
- fixed brake with hardware button too sensitive
- added and option to see which spacial freight unit is chosen (rather than have a surprise)
- added physically correct rudder weathercocking
- removed "No Smoking" switch for Freighter version

2.3.1
- added 777-F, extension purchase required
- fixed container orientation on the right side
- fixed loading states in some situations
- fixed cargo door speed
- fixed LoadMaster naming in call queue
- retuned terminal area cl/cd
- adjusted PBR of engines

2.3.0-closed-beta
- added 777-F, extension purchase required
- added ACARS service messages showing on CPDLC MANAGER ACARS page

2.2.3
- fixed sound of some avionics fans
- fixed aircraft symbol position on ND display in Plan mode
- fixed interactions with ground services
- fixed parkbrake on start on the ground default
- fixed messages during preflight
- small fixes radio system
- simplified the use of 1-sim/command/parkbrake_trigger command (no need to hold both pedals and lever)
- adjusted door unsafe lights behavior

2.2.2
- made AT less aggressive on high alt
- added requested mcp datarefs:
    1-sim/output/mcp/ok int, does mcp work or not
    1-sim/output/mcp/isSpdOpen int
    1-sim/output/mcp/isVsOpen int
- added requested cdu datarefs:
    1-sim/cdu[L, R, C]/ok int, does cdu work or not
    1-sim/cdu[L, R, C]/brt float, actual display brt
- added backlit to the clocks
- added more useful options for afk pilots, consult the the manual for details
- corrections for rte data displaying on nd

2.2.1-beta
NOTE: All previously saved situations are outdated for this update and must be removed.
      The model will NOT load with any previously saved situations, possible including default ones.
      Remove /data/states/xp11 and /data/states/xp12 folders before loading the model.
- implemented modern version of WX Radar and WX Panel with AUTO mode (Multiscan + Autotilt available in XP 12.3 and higher)
- added descent forecast winds
- added cruise forecast winds
- changed the logic how rte data is displayed on ND
- fixed incorrect WX Radar Tilt setting based on knob position
- fixed incorrect VAR indication on ND when WXR is in Auto-Gain mode
- fixed turbulence not drawn in WX Radar WX+T mode when it should be
- fixed Weather Radar output covering less space than it should
- fixed plane not loading due to Voice Recognition library initialization fail
- fixed ACARS PDC messages parsing
- fixed loading data from saved situations for ground services
- fixed rpath in various libs, so we hope most possible issues when loading the plane on linux are fixed

2.2.0-beta
- added new Weather Radar implementation based on X-Plane 12.3 capabilities
- added working WXR MAP mode and GCS option (requires X-Plane 12.3)
- added TFR/TEST modes for weather output
- added assigning keys(commands) for EFIS popups
- added ability to control Tcas modes using Dataref
- added missed logic for init ref key in climb phase (thr limit page)
- fixed little drawing artifacts near the edges of WXR/TERR output
- fixed Weather Radar not switching to WX mode from WX-T on higher ND ranges
- fixed WXR Gain knob affecting wrong modes (now only affects MAP mode)
- adjusted color palette output for TERR/WXR
- small fixes rounding of data displayed on displays
- fixed the behaviour of parkbrake when realistic option is on (use 1-sim/command/parkbrake_trigger command)
- fixed maintenance question remaining on
- fixed APU Bottle discharge after loading a custom situation
- fixed MINS RST Button logic
- fixed route waypoints DATA display on ND
- fixed missing park brake sound
- fixed possible rare fmc crash in vor/dme autotuning logic

2.1.2
- changed the oil use of APU
- changes a bit the behaviour of parkbrake when realistic option is on
- fixed speedbrake lever not being save in situation

2.1.1
- fixed display of Active Waypoint ETA on ND display
- fixed continuously repeated autoland clutch coupling sound
    also decreased the volume a bit
- fixed the reverser broken by LR in 12.3.0 
- fixed engine separation self correction
- fixed taxi light dependency on APU

2.1.0
- added intercept training scenario
- added tcas training scenario
- added UPRT training scenario
- added windshear training scenario
- added gear door unsafe lights to gear bays
- added keyboard for EFB performance calculator 
- added clutch coupling sound
- added emer light switch commands
- reverted landing light dataref level to 1 when on
- reduced brightness of nav, strobe and beacon lights
- reduced the lower bound of "regular brake intensity" option 
- fixed weights not updated on Briefing pages in case of changing weight units in plane options 
- fixed door emergency lights
- fixed UV on door handles
- fixed AOA amber box shows up on ground
- fixed saving compact view of displaying engine information when switching displays
- fixed right upper corner text widget not updating its size correctly based on output text size
- fixed display control for page output via CDU panel
- fixed possible soft crash related to SimBrief flight info not downloaded correctly on request
- fixed incorrect exterior light settings
- fixed no smocking purser call with "no electronics" option

2.0.63-beta
- reverted the "fixed down selecting lat/lon waypoints not as coords"
    As it has appeared buggy and deeper task to implement than I expected.
    Will return to that task later.


2.0.62-beta
- added ability to enter rwy on the rte page without lead zero
- added ability to enter planned step climbs with lead slash
- fixed down selecting lat/lon waypoints not as coords
- fixed using only current weight for planned step climbs

2.0.61-beta
- added step climbs (planned and predicted)
- added max alt fmc message logic
- added auto step climb unrealistic option
- fixed selecting default point for wpt/alt on des vnav page
- fixed possible wrong readout for clb error
- fixed possible wrong readout for next clb/des constraints on vnav pages

2.0.60-beta
- made at a little bit less aggressive
- made non-verbal voice sounds have subtitles
- fixed at goes to hold from idle on landing
- fixed CTD and incorrect logic on CPDLC review page
- fixed long messages incorrectly displayed in CPDLC message viewer
- made at a little bit less aggressive
- fixed display of ETA on ND display
- fixed calculation of cabin temperature when sensors fail
- added message "no electronics" on Eicas in no elec config
- fixed possible ctd on loading some co-routes
- fixed possible soft fmc crash in des segment calculation for some arrivals
- made some changes in des segment calculation to prevent possible too early decel

2.0.59-beta
- fixed the RR menu item (EE only)
- fixed UV on broken tires
- tweaked RR engine shapes and textures

2.0.58-beta
- added RR engines for EE pack
- added NO ELECTRONICS options (replaces NO SMOKING)
- fixed remote CDU functionality for back CDU (CDU3)
- small fixes request/rendering of Clock
- fixed CDU datarefs corruption when loading another FF aircraft in same session
- fixed difference in displayed Duct Pressure readings

2.0.57-beta
- fixes for vnav des path&speed logic in terms of appr mode and speed intervention mode
- tried to fix some weird case for des segment path, when eod could be not vnav valid leg
- fixed vnav goes through mcp alt in some cases in cruise
- small fixes for rare possible unexpected big vtk value

2.0.56-beta
- fixed des now function
- some fixes for possible issues with vnav target speed during descent
- fixed alt capturing after faf point during rnav approaches

2.0.55-beta
- made landing and taxi lights brighter
- extended replay time to 30m (eats memory, be carefull)
- fixed snow on open cowling and radar dome
- fixed engine training issues not autoending
- fixed autobrake switch not going to off on liftoff
- fixed soft crash in xp11 after loading with pressurization effects off after loading xp12
- fixed fmc soft crash on some procs (dist > 0 in the log)
- fixed display of Vertical Deviation scale on ND, as well as RNP/ANP on PFD and ND depending on the option
- fixed another possible fmc soft crash on some procs due to incorrect constraints
- fixed afds loading to eng running state
- fixed port busy crash for remote CDU. NOTE!!!! default port has changed 9090 --> 18387 (changeable now in EFB/general airplane options)
- possible fix for no sound in some cases

2.0.54-beta
NOTE: All previously saved situations are outdated for this update and must be removed.
      The model will NOT load with any previously saved situations, possible including default ones.
      Remove /data/states/xp11 and /data/states/xp12 folders before loading the model.

- reworked vertical profile construction almost from scratch
    (to be able to move forward, fixing issues and adding missed features)
- improved vertical profile construction, more stable, more accurate, including accel/decel segments for clb/des parts
- fixed possible unexpected descent phase just after takeoff
- fixed possible unexpected descent profile calculated through the whole fpl up to departure rwy
- fixed possible unexpected spd/alt readouts and t/c t/d points on nd flickering
- added a lot of missed, vnav related readouts and highlights on vnav, legs and other cdu pages
- added pause on t/d option (check the EFB)
- changed alt hold mcp button behavior to more correct based on a certified pilot opinion
- fixed afds loading into c&d ready state
- applied missed time multiplier to gps warm up time
- fixed inserting pdpd/pbd into rte2
- fixed unexpected disappearing t/c point before reaching it
- added ability to use Remote CDU (documented in "remote instrumentation manual.pdf" file)
- made tiny information widget in screen right upper corner disappear on mouse click
- extended replay time to 30m (eats vram, be careful)
- made landing and taxi lights brighter

- added ability to actually hear your ELT on VHF
- UTC time check signal on HF now leaks to near frequencies
- some text and knobs fixes

2.0.53-beta
- fixed CTD during aircraft reload, engine type change or loading custom situation on macOS
- fixed soft crash on state load (including default) with option remember consumables
- fixed EFIS knobs behaviour (XP11)
- fixed glareshield light knob animation (XP11)
- fixed window placard animation (XP11)

2.0.52-beta
- added the documentation for cdu datarefs/commands api

2.0.51-beta
- added flaps & slats secondary mode failures
- added brake indication failures
- added crew oxygen system failures and MEL
- added bank protection failures and MEL
- added MEL items for electrical system (IDG, APU and BU)
- added the ELT
- added datarefs for CDU
- added new functional to Situation text field (After selecting a situation, the name of the selected situation will be automatically entered into the input field and selecting all text when editing)
- fixed crash while aircraft reloading on Mac
- fixed limitations of displayed readings on EICAS
- fixed a soft crash with purser frustration
- fixed the chronometer being a big late

2.0.50-beta
- fixed toilet problems on long flights, visits became less frequent
- fixed inserting pbpb/pbd into rte2
- fixed need to double-click buttons on EfisControlPane when loading from Situation
- fixed possible CTD related to CPDLC/ACARS messages processing
- exterior lights brightness reduced
- altered alt hold afds mode on push alt hold mcp button

2.0.49-beta
- made changes to wingflex
- added additional autogenerated commands for triggers that emulate buttons for Arduino type controllers (down is 0 pos, up is 1 pos)
- added additional autogenerated commands for switches that allow setting values directly, in addition to up and down commands
- fixed a few typos in the checklist procedures text
- fixed physical R4 button not work on EFB Situations page
- fixed xp11 missing reverse option button
- fixed engine crossbleed start
- fixed DUCT PRESSURE indication - NAN(right engine start)

2.0.48-beta
- change the EGT core temperature change rate
- changed the duct pressure calculation
- added more specific diagnostic messages in case of possible issues with getting briefing from SimBrief in EFB
- fixed Center Hydraulic System ADP after landing
- fixed replay on pause issue (soft crash)
- fixed flaperon drop bug on reverse
- fixed v1 cut scenario
- fixed high engine Oil Temperature
- fixed TCAS targets not displaying on ND in case of custom online traffic providers

2.0.47-beta
- fixed regression introduced in version 2.0.46 (soft crashes related to situations with positions and training positions)

2.0.46-beta
- fixed displays not working correctly with NVIDIA 50 series graphics cards/drivers

2.0.45-beta
- added 8.6 psi diff protection to cabin altitude settings
- added a single command to arm both ATs
- added vnav speed band option
- added some functionality for data sharing between two airplanes.
- improved vnav_path speed reversion logic
- changed the airflow algorithm to make the pressurization capability more realistic
- fixed bug with ACARS climb request
- fixed logic center Hydraulic System
- fixed EICAS display(compacted format), when INBOARD DSPL switch is in EICAS state
- fixed incorrect inhibit behaviour after save/load state
- fixed missing gear config warning on landing
- fixed FL/Alt readouts in several places in cdu

2.0.44-beta
- made changes to pressurization system
- fixed responding to PDC messages in ACARS system
- fixed a few knobs animations
- fixed the replay length not being saved between flights
- fixed a soft crash in replay mode OFF
- fixed a soft crash with replay and snow (snow not supported in replay for now)
- fixed flaperon bypass and added speed damping on exit
- fixed incorrect checklist behaviour on start
- fixed the pressurization getting stuck in test mode after turnaround
- fixed landing lights dimming with APU gen off
- fixed oxygen mask test sound

2.0.43-beta
- added ability to service a group of gears(wheels) at once
- fixed soft crash on state saving
- fixed possible cases of incorrect systems behavior after loading saved state

2.0.42-beta
- one more fix for PA in use getting stuck
- fixed fuel consumption when cross feed is on
- fixed soft crash when changing to PW
- fixed missing sound in cockpit with PW
- fixed center tank low fuel logic including
- fixed issue with displaying autosave options after reload

2.0.41-beta
- fixed rat rotation speed
- fixed soft crash on cold & dark

2.0.40-beta
- added an option for realistic parking brake and added data to the manual (many options)
- added multiple pressurization effects, clogged ears, Valsalva maneuver and more (XP12 only)
- added a full pressurization algorithm integrated with FMS
- added replay support for outside view only! (30 seconds - 10 min)
- added auto save situations option
- fixed display of DME station data on ND/PFD
- fixed Duct pressure gradually increases before pneumatic air truck spawns
- fixed nose gear PSI decreases drastically
- fixed issue with situations without date
- fixed issue with EFB time

2.0.38-beta
- fixed aircraft not loading and not work correctly in cold & dark configurations
- fixed draining and filling of all water/waste tanks
- fixed cockpit windows animation
- fixed the wind low speed bug (airplane jumping)

2.0.37-beta
- EE: tunned vibration for PW engine
- fixed UV of stabilizer fairing
- fixed popup windows in popped out state (in separate OS window) not saving their positions between flights
- fixed glass transparency at night
- fixed INBOARD DSPL selector logic
- fixed no thrust during descent
- fixed output of text about reboot when changing state of Standby Instruments in EFB
- fixed no go to crzClb when alt diff less or equal 1000 ft
- made the at less aggressive in turbulent air when epr controlled

2.0.36-beta
- fixed Oil Qty when "FULL MAINTENANCE"
- fixed MCP Altitude Knob Sensitivity
- fixed icing on PW engines at night
- fixed engine start from APU
- fixed incorrect cabin pressure on start
- fixed unexpected timeout-reselect issue when crz level is above tropo
- fixed RAT dropping when loading from a situation

2.0.35-beta
- EE required: added PW4090 engines for -200ER
- added new drag model
- added drag from open doors
- added aircraft age
- added ability to change drag/ff factors in cdu and they will affect the profile (ARM word is expected to init ability to edit)
- added "no" voices for the PA purser menu
- added equipment auto-disconnect when manual equipment options is off
- added more popup clickzones at EFBs
- added some notes to the deicing procedure
- changed hardwalls positions in the cabin
- adjusted flap angles
- tunned engine EGT, and start times
- update EFB Terminal Charts App to use newer Navigraph API
- retuned the taxiing behaviour
- fixed Ground pneumatic supply does not increase left manifold duct pressure
- fixed Right manifold duct pressure linked to wrong pack
- fixed WAI valves do not unseal manifold ducts
- fixed Left manifold duct pressure increases without gradient at beginning of flight
- fixed L ISLN valve opens without transit
- fixed No passengers but lavatories occupied
- fixed EDDF airport search in EFB AMM application
- fixed possible incorrect airport name displayed in Terminal Charts application
- fixed spelling on EFB ACARS service selection page
- fixed xp11 ghost levers when in custom reverse mode
- fixed missing upper menu highlights in COMM
- fixed next ATC station not displaying during HANDOVER
- fixed display of Maintenance pages on displays when selecting MAINT INFO DISPLAY on CDU
- fixed positions of the brightness and turn on\off buttons on the right EFB
- fixed display on displays depending on "inboard dspl" switch mode
- fixed snow on separated engines
- fixed CPDLC/ACARS crashes
- fixed some rare possible crashes in fmc/cdu
- fixed 2d pop-up click behaviour on touch displays
- fixed numerous controller nuances
- fixed text with door number on Directory page in Cabin Interphone
- fixed Engine Start ISO Valve Logic w/ APU Bleed Air
- fixed Pack Supply Bleed Air Logic On Ground
- fixed operation of mechanical switches independent of electricity for MCP and EFIS Control panels

2.0.34-beta
- some fixes for opt in terms of wind/ai/slope taking into account
- made it possible to use EFB with no voice option
- fixed numerous brake issues
- fixed BrakeAccum pressure
- fixed display of Dot on RadioPanel
- fixed duct pressure during engine start trapping in the system
- fixed fuel center low message
- fixed the APU not being able to provide hot air
- fixed APU fire handle locking mechanism
- fixed hyd leak cutoff on engine fuel cut-off
- fixed a funny bug with FO only reading the checklist items when looking at the checklist
- fixed expanded fuel indications on Eicas
- fixed TFC on ND with TCAS off
- fixed coords downselect to scratch pad
- fixed possible missed some dep/arr/appr transition from the dep/arr pages
- fixed OPT wind bug
- fixed OPT v1 wind dependency

2.0.33-beta
- added more functional/logic to ACARS/CPDLC, including internal messages on COMM pages and relations with radios
- small fix for temperature setting
- revisited end of flight logic in fmc
- fixed Lavatory works unpowered
- fixed Park brake not working
- fixed minor bug with temperature settings
- fixed hydraulic leak when engine is separated
- fixed possible rare issues when inserting preselected awy
- fixed possible big radius for direct-to
- fixed no lda approaches
- fixed possible ctd when loading a situation with specific state (e.g. when rte page is saved in Inactive fmc)
- fixed wind component readout on prog page
- fixed possible missed constraints in inserted proc in first proc leg
- fixed vnav_spd in terms of constraints in clb/des modes/phases
- fixed des now function broken in one of prev updates
- fixed knobs texture (xp11)

2.0.32-beta
- changed taxiing behaviour
- added more sophisticated tire wear behaviour
- added e/d to nd
- added gp readout to legs page
- added flush in the toilet with a button, taking into account water consumption and waste
- fixed shake of engines details
- fixed EICAS Thrust Reverser Indication position
- fixed saving "baro settings" in saved situation
- fixed Standby Freq in Aircraft does not match the Radio Panel
- fixed Lavatory/Water issues
- fixed EPCS Maintenance page wT/dT/iT discrepancy
- XP12.3 + throttle fix, commands now work along with the curve

2.0.31-beta
- fixed CTD when loading to cold&dark introduced in the 2.0.30
- fixed beta 3 and up feature of reverse curve automatically working from XP

2.0.30-beta
- changed EFB interface to work with external services (Navigraph, Hoppie etc) a little bit
- changed water and waste tank sizes depend on aircraft model
- added UTC time report via HF, frequency: 5000,10000,15000,25000
- added Crew Feedback functional for ATC messages
- added ACARS MANAGER second page in COMM
- added failures logic to CPDLC system
- added ability to use SayIntensions.AI as ACARS service for CPDLC
- added 777 version without access to the cabin for better performance
- added more protection to SPEEDBRAKE EXTENDED
- added loadsheet on the right when flying from the right seat
- added tire wear
- added flight performance data (pdf)
- added toilet flush sounds
- added check displaying "large of digits" of oil quantity/temperature on EICAS
- added XP12.3 and up feature of reverse curve automatically working from XP (new addition for LR will work only when LR adds the functionality)
- added more complex leak scenarios for engine separation
- fixed message text positioning on COMM pages
- fixed some possible CTDs related to ACARS messages
- fixed handling ACARS connection issues as errors
- fixed SEND/ACCEPT/REJECT buttons available in COMM when connection is not established
- fixed some invisible toilet doors
- fixed display of N1 on EICAS
- fixed display of negative N1 on Maintenance Display
- fixed several bugs and soft crashes with training fires
- fixed the flight performance of the airplane (broken in v25)
- fixed AT FMA indication for HOLd mode
- fixed thr req message
- fixed unexpected not found tod in some cases
- fixed soft crash when flying with no perf init page done
- revisited the alt alert logic
- revisited eta calculation when changing sim time
- improved stability of the descent profile
- additional fixes for soft crashes due to startCrs is nan

2.0.29-beta
- added the ability to manually set the idle/reverse detent in the EFB
- added correct handling of current/next station in CPDLC
- added missing ability to manually logoff from ATC station in CPDLC
- added more status notifications on COMM pages
- added snow to the engines
- improved visual behavior of engines
- improved blade rotation at low speed
- renamed the toilets
- fixed SEND buttons active when plane is not connected to Hoppie ACARS
- fixed some colors on COMM pages
- fixed FO briefing ending after pressing END CALL on CDU
- fixed missing "HDG/TRK bug" on ND
- fixed purser calling while she is on PA bug
- fixed some eicas messages from AT/ASMs
- fixed reverse engagement using single axis (maybe)
- fixed wrong OEW number reported on Cabin Configuration EFB page
- fixed Interflight Failures option not saving
- fixed central panel knobs texture
- fixed negative tire pressure indication
- fixed a bug with engine fixing itself after major failure
- fixed a crash on lavatory fire
- fixed the droop speed
- fixed bug when aileron trim scale keeps visible if yoke is hidden (xp11)
- fixed the brightness of the nose part which visible from the cockpit
- fixed the gap between the fuselage and the wing
- fixed visually broken ice detectors on start
- fixed default temperatures in air (on initial load in air)
- fixed cabin diff sensor with no power
- fixed lav fires
- fixed wrong preflight seq prompts
- fixed possible bad optional access soft crash
- fixed possible issue with ils autotuning when the rwy has the same ils freq on both sides
- fixed wrong limitation for reserve fuel entry
- loadsheet position now depends on the player's seat position
- connected min fuel temp from fmc to the aircraft systems
- revisited init pos and related messages logic

2.0.28-beta
- add ability to use CDU scratch pad to enter text on COMM pages
- add the option to enter OPT weight in Tons
- add an option to disable pilot response alert
- add an option to disable clear left/right oral check
- add an option to allow only messages from ATC in COMM functional
- fixed issue with engines magically running with no fuel!
- fixed issue with displaying situations while they created in 1 minute
- fixed the oxy test for all but cpt
- fixed TO-1/TO-2 incorrect ATM calculation in OPT
- fixed the outflow valve controller (much smoother now)
- fixed bleed dependency on electrical power
- fixed missing digital signature for one of the files on macOS
- fixed duplicate names for engine fuel leak failures
- fixed an issue with APU fire shutoff
- fixed TELEX messages showing in New Messages until answered
- fixed issue with second Electrical Maintenance Page
- fixed low RPM N2, N1 indication
- fixed CDU3 stairs vs gate issue
- minor changes to gear gravity extension
- tire pressure differences and randomization is now based on MTBF
- changed color in input fields to more brightness

2.0.27-beta
- speed up catering loading
- fixed oil temperature
- fixed engine reset after an issue
- fixed a weird EGT jump on dry motoring
- fixed engine issues not synching with failures when engaged through failures
- fixed landing lights dataref value
- fixed soft crash after failed attempt to fetch SimBrief briefing
- fixed the DU INBD light synch with display switch
- fixed a bug with clicks going through to screens which are off
- minor fix to water consumption
- renamed the CLOSE ALL button on the DOORS EFB page
- tuned the EGT rise during normal start

2.0.26-beta
- fixed plane not loading in X-Plane version > 12.1.2-r3

2.0.25-beta
- major changes to OPT, optimization fixed, interface fixes
- added visual and mass effects of engine separation
- added an options for a gate configuration with GPUs and GCUs
- added COMM indication on EICAS
- fixed a few missing weight warning in the EFB
- made 2 EFBs completely independent (no sync between pages)
- corrected airspeed low alert now at 70% of min mnv speed.
- corrected display of EGT Start Limit Line on EICAS
- changed APU START SYS test logic
- fixed edge case of flap computer crash during state load
- fixed pushbutton stick bug and possibly CDU ghost inputs
- fixed the appearance of the jetway when the "Draw gate" option is disabled
- fixed cases when EFB BACK buttons doesn't work correctly
- fixed a few GUI elements depiction on EFB pages
- fixed cabin light, now it better visible on external view
- fixed display on EICAS of RECALL when pressing CANC/RCL has been
- fixed possible EFB window position change when interacting with Ground Service page
- fixed an issue with asynchronization of same MFD pages on two displays at the same time
- fixed training/regular ice on windshield effects (requires XP12.10.3)
- fixed a few missing ZFW and ARW checks on the EFB
- fixed some cases of cone dragging
- fixed HDG/TRK dashed line when ND auto hides when it shouldn't

2.0.24-beta
- fixed soft crash when using spoilers via hardware axis once any reverser has been activated
- fixed soft crash with minimum fuel temperature after refueling
- fixed soft crash related to "Update nav log times after takeoff" option and loading situations
- fixed transparency of glass
- fixed missing JAR GHD sets for X-Plane 11 and X-Plane 12
- fixed unintentionally removed takeoff 10 min inhibit of ils autotuning
- fixed reset v-speeds and derated thrust on toga activation
- fixed possible fmc situation loading error related to master/spare fmc roles

2.0.23-beta
- added more splash images
- added JAR GHD sets for X-Plane 11 and X-Plane 12
- added JAR GHD integration option
- added option to update zulu times in Navlog (SimBrief) after takeoff
- added clb/des dir and des now functions
- added more logging on vnav stuff, fmc and tmcs
- added an additional sanity check for reset mcp alt msg
- added crzClb/crzDes sub phases
- fixed warnings during engine start
- fixed PDC message format in CPDLC
- fixed using local time in CPDLC messages time labels
- fixed possible soft crash on COMM pages when loading custom state
- fixed many things in the performance takeoff calculator
- fixed rounding issues in the loadsheet
- fixed splash screen typo
- fixed Propulsion Data Limits page recording
- fixed some soft/hard possible crashed of the fmc/cdu
- fixed some possible situation when des profile goes crazy
- fixed xp11 cdu exec lamp
- fixed xp12 cdu lamps at night in 2d popups
- fixed loadsheet rounding
- fixed some sasl soft crashes
- fixed some issues with rail on windshield
- revisited some afds/fmc vnav guidance logic
- revisited ils autotuning logic
- changed minor Navigraph authentication process details for Charts App

2.0.22-beta
- fixed flap load relief sequencing
- fixed potential roll integrator windup
- fixed issues with landing performance page EFB
- fixed possible 399 cas as vnav target speed
- revisited vnav_alt logic
- cruise speed target now 250 cas below 10000
- fixes for flight phase logic
- fixed unexpected reset crz level by pushing mcp alt knob within 50nm of t/d
- fixed clean up vnav pages when sub page changed
- various fixes for wrong lat path calculation in some weird cases including related soft crashes
- fixed rwy ext point inserting
- fixed possible not using rwy from rwy ext approach as eod
- fixed uncommanded spoiler retraction after landing (also leading autobrake disconnect) due to noisy hardware
- fixed the cross connection of hyd pumps
- addded frequency set function to FO voice control
- addded fuel test logic, freeze logic and faults as well as CPDLC mesg
- APU selftest reset


2.0.21-beta
- added ERASE button to AUDIO PANELS, EMERGENCY LT BATTERIES and PERFORMANCE maintenance pages
- added FUEL CYNC button to loading page
- remade Navigraph Charts authentication in EFB app using secure methods and refresh tokens
- fixed Navigraph Charts web authentication process not working correctly for some cases
- fixed Terminal Charts EFB app work incorrectly with lowercase ICAO codes
- fixed Terminal Charts EFB app not allow only ORIG or DEST airport to proceed
- fixed entire flap sequencing using a state machine
- fixed the deicing procedures
- fixed some spelling mistakes
- fixed the PRI FLIGHT COMPUTERS NNL
- fixed all logics related to flaperons but excluding hydraulic power ups.
- fixed buttons glowing when pulled out of the panel
- fixed FUEL PUMP L AFT... checklist
- fixed no auto true hdg ref in polar region
- fixed possible fmc soft crash with "from/to Crs is NAN" error
- fixed again unexpected leg sequencing
- fixed some cases when lnav does not sequence a leg when it should
- fixed big predicted turns on ND in some cases
- fixed various issues for des profile
    including but not limited to:
    - unexpected disappearing
    - unexpected holes in the profile
    - soft crashes in some conditions
    - and more
- fixed des/appr flight phases switch between them continuously
- increased econ cas speeds
- reduced size of the front sunvisors clickzone
- various small improvements in 3d cockpit


2.0.20-beta
- fixed some typos
- fixed flap sequencing
- fixed engine oil filter warnings
- fixed engine oil consumption
- fixed ghost TCAS RA
- fixed AT does not go to THR or THR REF when TOGA activated
- fixed displaying unavail estimated alt on ND when rte dat is enabled
- fixed some logic for case when apt elevation is negative
- fixed FLCH afds mode
- fixed possible vnav_spd does not accelerating on climb
- fixed various soft crashes of fmc in various cases
- fixed unexpected leg sequencing when direct-to is active
- fixed some logic for fmc flight phase selecting
- fixed some downselect logic on pos init cdu page
- fixed auto selecting current active vnav page on flight phase changing
- fixed performance landing calculator in EFB
- retuned a little pitch autopilot channel
- retuned AP overpower by yoke and added an option to EFB

2.0.19-beta
- added VNAV
    VNAV is still in work in progress state, so it could be buggy and has missed features, readouts and etc.
    Known buggy/missed things for the moment:
    - Buggy or no at all vnav guidance for holds and vector legs
    - Missed some data and readouts on vnav cdu pages
    - Missed some magenta highlighting for some active vnav readouts in the cdu
    - No any winds is considered for vnav calculation
    - Missed some fmc messages related to vnav
    - GA in relation to vnav is buggy or doesn't work at all
    - Missed some vnav functions like CLB/DES DIR or DES NOW
    - Descent vnav guidance/profile could be buggy
- fixed "Broken Blade" failure causes soft crash at high thrust
- fixed RAT folding during maintenance